Spa Fusion Aqua Sachet (35g)

One sachet treats up to 1500 litres

The fantastic easy to use product is ideal for those in a hurry. Bathing can normally resume after just 1 hour. Always test your spa before use.

Spa Fusion should be used weekly or after heavy spa use to help remove bather wastes that can build-up in spa water over time resulting in odours, reduced water clarity and unpleasant bathing conditions. 

How do I use Spa Fusion Oxidiser?

1. Whilst the pump is running, empty the whole sachet contents into the spa and run the system for a minimum of one hour leaving the spa cover off.
2. One sachet (35g) will treat spas up to 1,500 litres (330 gallons).
3. Check the chlorine/bromine level after application. If levels have fallen withinthe recommended range of 3 – 5mg/l for chlorine or bromine the spa may be used after 1 hour.

Important: When dosing this product wear eye and face protection and ensure granules are not blown back towards you.

Note: As Aqua Sachets cannot be re-sealed, the whole sachet must be used in one treatment.

PRECAUTIONS - HANDLING / STORAGE: Always refer to the packaging! Handle products in a well-ventilated area, preferably outdoors. Was hands after use. Ensure chemicals do not become damp in storage. Store in a cool dry place.

WARNING: DO NOT MIX WITH OTHER PRODUCTS - MAY RELEASE DANGEROUS GASES (CHLORINE).